What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (2024)

Having the right size socket when dealing with these big Chevrolet Silverado 1500 axle nuts sizes is almost always hard because you never have the right socket. Buying one also hurts because it costs so much and you only need it probably for this one job. Nevertheless, we go and buy as there is no other option.

From 1999 to 2013 year model, the Chevrolet Silverado 1500 axle nut size is 36mm (1-7/16″). From 2014 onwards, the nut size is 35mm (1-3/8″).

Here is a convenient way for you to order one if you need it from Amazon.

1999 to 2013
35mm Socket
2014 to Present
36mm Socket
What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (1)View on AmazonWhat Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (2)View on Amazon

The above links are our affiliate links to Amazon. We earn commission from qualifying purchases. It does not cost you anything and it supports our work. :)

Because the aftermarket nut sizes can vary, it is best to have both, 35mm and 36mm sockets available when working on your truck’s axles. If you don’t have both, go out and buy both, then return the one you don’t end up using. That is what I do sometimes when it comes to this kind of situation.

The CV Axle Nut Sizes For All Chevrolet Silverado 1500 Years

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (3)

There was only one change in the size of the CV axle nut. In the 2014 Chevy Silverado 1500 model the CV axle nut size was changed to 35mm from 36mm and it has stayed this size up to now.

Some aftermarket CV axles comes with a nut that is 35mm and some 36mm, so if yours has been changed out at some point in the truck’s life, it may have the 35mm nut.

2014 Chevy Silverado & GMC Sierra Axle Nut Size

The 2014 Chevrolet Silverado & GMC Sierra have a specific axle nut size. When the truck comes from the factory, the axle nut size is 35mm. That’s same as 1-3/8″ in SAE. But, if someone has changed it in the past, the size might be different. For example, an aftermarket nut could be 35mm or 36mm. So, inspect the axle nut size if any replacement was done.

2015 Chevy Silverado & GMC Sierra Axle Nut Size

The axle nut size of the 2015 Chevrolet Silverado and GMC Sierra doesn’t change from the prior year model. It comes with a 35mm nut (1-3/8″),from the factory. However, if there has been a change with an aftermarket part, it could increase in size to a 36mm nut. That’s why it’s important to check the nut size if the part isn’t original.

2016 Chevy Silverado & GMC Sierra Axle Nut Size

Just like the models from the previous years, the 2016 Chevrolet Silverado and the GMC Sierra have an axle nut size of 35mm (1-3/8″) from the production line. If there has been a switch to an aftermarket nut after, the size may increase to 36mm. Checking the size is a good idea if the nut isn’t the one that came with the truck.

2017 Chevy Silverado & GMC Sierra Axle Nut Size

For the 2017 Chevrolet Silverado and GMC Sierra, the axle nut size is a familiar 35mm, (1-3/8″). Sometimes, if the axle nut has been replaced with an aftermarket part, it could be a larger 36mm size. So, if you have a new nut, it’s wise to check its size.

2018 Chevy Silverado & GMC Sierra Axle Nut Size

Next up, the 2018 Chevrolet Silverado and GMC Sierra follow the same pattern. The axle nut size is 35mm (1-3/8″). But with any aftermarket replacement, the size can increase to 36mm. So, ensure to measure the size if there’s a new nut in place.

2019 And Newer Chevy Silverado & GMC Sierra Axle Nut Sizes

The rest of the years up until the current year all continue to have the 35mm nut size unless it is an aftermarket nut, in which case it could be 36mm.

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (4)

Chevrolet Silverado 1500 CV Axle Nut Sizes

Chevy Silverado YearSAE Socket SizeMetric Socket SizeAftermarket Nut Size
19991-7/16"36mm36mm/35mm
20001-7/16"36mm36mm/35mm
20011-7/16"36mm36mm/35mm
20021-7/16"36mm36mm/35mm
20031-7/16"36mm36mm/35mm
20041-7/16"36mm36mm/35mm
20051-7/16"36mm36mm/35mm
20061-7/16"36mm36mm/35mm
20071-7/16"36mm36mm/35mm
20081-7/16"36mm36mm/35mm
20091-7/16"36mm36mm/35mm
20101-7/16"36mm36mm/35mm
20111-7/16"36mm36mm/35mm
20121-7/16"36mm36mm/35mm
20131-7/16"36mm36mm/35mm
20141-3/8"35mm36mm/35mm
20151-3/8"35mm36mm/35mm
20161-3/8"35mm36mm/35mm
20171-3/8"35mm36mm/35mm
20181-3/8"35mm36mm/35mm
20191-3/8"35mm36mm/35mm
20201-3/8"35mm36mm/35mm
20211-3/8"35mm36mm/35mm
20221-3/8"35mm36mm/35mm
20231-3/8"35mm36mm/35mm
20241-3/8"35mm36mm/35mm

What Are The Symptoms Of A Chevy Silverado 1500 CV Axle Going Out?

A constant velocity axle, also called a CV axle or a half shaft, transfers power from the Silverado’s transmission and differential to the wheels and moves the vehicle. Regular wear and tear can take a toll and, in time, damages the CV axle. When this happens, the power from the engine will no longer be transferred to the wheels, and the truck will not be able to move.

The CV axle does not suddenly fail, it gets worn down, and there are symptoms that show the damage to the axle. The following are the most common symptoms that the CV axle is about to give out.

  1. Vibration while driving. The axle will not turn smoothly, causing vibrations while the vehicle is moving.
  2. Grease on the inside or edge of tires. The axle is greased to ensure efficient operation. When the gaskets or boot is damaged, the grease leaks out onto the inside or the edge of the tire.
  3. A knocking sound. Any knocking sound made by the truck can be a sign of trouble. The CV axle makes a knocking sound when it is damaged or about to have significant damage.
  4. Clicking noises when turning. The CV axle creates a distinctive clicking sound during turns. During a turn, the two CV axles turn at different speeds.

Test Your Chevy Truck Knowledge!

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (5)

What Happens When Chevy Silverado 1500 CV Axle Goes Bad?

When the CV axle on a Silverado 1500 goes bad, the whole driving experience is affected. The vehicle will no longer be able to move on its power.

Before the total failure, the vehicle will experience the following:

  • Clicking or popping sounds. You can hear clicking or popping sounds whenever you turn the steering wheel or accelerate.
  • Grinding noises. The damaged CV axle will rotate unevenly, causing even more damage. The CV axle will grind further against the assembly and other metals. It will be heard during turns and while accelerating.
  • Shaking or wobbling. Along with the popping and clicking sounds, the vehicle will also experience some shaking and wobbling during acceleration and turning.
  • Vibrations. The truck will vibrate when the CV axle is damaged. The broken axle will not be able to rotate correctly, causing uneven movement and transfer of power.
  • Difficulty in turning. Due to the uneven power transfer, turning the vehicle will be difficult.

When the CV axle goes bad, it is best to bring the vehicle to a mechanic for diagnostics and to give the problem. The CV axle may need to be replaced if it has already gone bad.

Can I Drive My Chevrolet Silverado 1500 With A Bad CV Axle?

When the Chevy Silverado 1500 CV axle goes bad, you shouldn’t drive it until the problem is fixed. Driving the vehicle with symptoms of a bad CV axle can cause more damage to the truck. If it falls while you drive it, the truck may lose power and control and cause an accident.

Having said that, if the symptoms just started and you hear a slight clicking when turning, you don’t have to stop the truck instantly. It is safe for you to drive home. After you get home you should contact your mechanic and get it repaired before taking the truck out on the road.

Take the HARD Chevy Truck Quiz

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (6)

What Does A Failing CV Axle Sound Like?

A failing CV axle sounds like a rough shaft turning against its housing. It produces a mechanical sound that is grating and will attract a lot of attention from the driver, passengers and anyone within hearing distance.

The most distinctive sound is a popping or clicking sound that usually occurs when the vehicle takes a turn. The sound is also pronounced when accelerating or when the shaft rotates faster. It sounds like a worn half-shaft or CV joint moving inside and abrading another metal.

Another typical sound of a failing CV shaft is an ominous vibration or rumbling. The vibration occurs because there is an imbalance in rotation between the opposing CV axles. The driver will be able to feel the vibration through the steering wheel. The vibration is also felt throughout the vehicle. It gets worse when traveling at high speeds.

Sometimes, when decelerating or accelerating, a grinding or knocking sound is produced by the damaged CV axle. Again, the sound is generated by the worn shaft or damaged bearings inside the joint.
Suppose these sounds occur while driving, turning the vehicle, accelerating, and decelerating. In that case, you should have a mechanic check the truck to determine the source of the sound and have the problem fixed before it worsens.

Can You Replace One CV Axle At A Time?

Yes, you can replace one CV axle at a time. The two opposing CVs operate independently of one another, and there is no reason to suspect that the cause of failure in one can also damage the opposing CV axle. It is not necessary to replace both CV axle joints simultaneously. However, while the mechanic is determining any damage to the CV, he can also take the time to inspect its opposing member, just in case.

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (7)

Valik Rudd

Valik loves tinkering in the garage and is currently restoring a 2000 GMC Sierra 1500 truck. He also writes about the progress on this blog. When not in the garage, Valik is also a web developer and a blogger. I know, strange, a hand in two completely different worlds. And that is the way he likes to keep it.

Also Read:

  • What Size Axle Nut Is On A Dodge Ram 1500? [All Years Chart]
  • What Size Axle Nut Is On A Dodge Ram 2500? [Each Year Chart]
  • What Size Axle Nut Is On A 2006 Chevrolet Silverado 1500?
  • What Size Axle Nut Is On A Chevrolet Silverado 2500?…
  • 1995-2023 Toyota Tacoma Axle Nut Size

Contents show

1. The CV Axle Nut Sizes For All Chevrolet Silverado 1500 Years

2. What Are The Symptoms Of A Chevy Silverado 1500 CV Axle Going Out?

3. What Happens When Chevy Silverado 1500 CV Axle Goes Bad?

4. Can I Drive My Chevrolet Silverado 1500 With A Bad CV Axle?

5. What Does A Failing CV Axle Sound Like?

6. Can You Replace One CV Axle At A Time?

What Size Axle Nut Is On A Chevrolet Silverado 1500? [Each Year Chart] (2024)

FAQs

What size is the axle nut on a Chevy Silverado 1500? ›

Chevy Silverado Axle Nut Size: 36mm | JustAnswer Q&A.

What size is the axle nut on a 2001 Chevy 1500? ›

The axle nut will be either a 34, or a 36 mm. Depending on the front diff setup in your truck.

What size is the front axle nut on a 2002 Chevy Silverado? ›

The 2002 Chevy 2500hd front axle nut size iS36 mm.

What size is the axle nut? ›

Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.

What socket do I need to remove axle nut? ›

This Powerbuilt axle nut socket is a high quality, durable 1/2" drive impact-rated 31mm socket forged from chrome molybdenum steel.

What size socket do you need for a CV axle? ›

It is a 32mm nut.

What size is the axle nut on a 2010 GMC Sierra 1500? ›

Next, Put the axle nut back on and hand tighten it using the 36mm socket.

What is the torque on the axle nut on a 2013 GMC Sierra 1500? ›

The torque is 177ft lbs for the front axle nut. GM doesn't call for loctite, and personally I wouldn't use it on a nut that is torqued to 177ft lbs. If you ever have to take it back off, it will be a bear!

What is the torque on the front axle nut of a 2009 Chevy Silverado 1500? ›

On the 2009 Chevy Truck Silverado 1500 4WD with the V8-5.3L engine, the Inboard Flange Bolts are to be torqued to 58 ft. lbs. And the Hub Nut is to be torqued to 177 ft. lbs.

What is the torque spec for the axle nut on a 2005 Chevy 1500? ›

250 Nm (184 ft. lbs.). Important: Do not reuse the nut. A new nut must be used when installing the wheel drive shaft.

What size is pinion nut Silverado? ›

1 1/4" socket, 7/8" x 14 thread.

What is the torque on the front axle nut of a 2000 Chevy Silverado? ›

On the 2000 Chevy Silverado, the CV axle inboard flange bolts are torqued to 58 ft. lbs. And the hub nut to 177 ft. lbs.

Can you over tighten an axle nut? ›

Avoid Overtightening – Use the Right Tool

Many technicians use an impact gun when installing an axle nut on a wheel hub bearing which not only overtightens the bearing but can also cause premature wear to the hub assembly. MOOG recommends using a torque wrench to tighten the axle nut accurately.

Can I reuse an axle nut? ›

Regardless of the style your vehicle uses, the message remains the same: if you've taken one off, get a new one for reinstallation. Here's why: a previously used nut won't sustain the necessary torque when reused.

What size is my wheel nut? ›

Your owner's manual should tell you what size to get – alternatively, you can use a thread pitch gauge to find out. Whatever size or type of wheel bolts and nuts you need, Euro Car Parts can supply them.

What size socket is a Chevy 1500 lug nut? ›

The socket size of a Chevy Silverado 1500 lug nut is 13/16″, so you would need a 22mm hex socket to fit. When operating daily tire maintenance, you have to remove all the stock Silverado lug nuts.

What size are the wheel nuts on a 2015 Silverado? ›

Notes: Nut. 14 mm x 1.50 thread size, 7/8" hex.

What size is the GM 12 bolt axle? ›

For example, a stock 30-spline 12-bolt axle has a major diameter of 1.291 inches, while a 35-spline axle measures 1.50 inches. Spline shape is significant. Factory axles are manufactured with an involute spline.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Virgilio Hermann JD

Last Updated:

Views: 6304

Rating: 4 / 5 (41 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Virgilio Hermann JD

Birthday: 1997-12-21

Address: 6946 Schoen Cove, Sipesshire, MO 55944

Phone: +3763365785260

Job: Accounting Engineer

Hobby: Web surfing, Rafting, Dowsing, Stand-up comedy, Ghost hunting, Swimming, Amateur radio

Introduction: My name is Virgilio Hermann JD, I am a fine, gifted, beautiful, encouraging, kind, talented, zealous person who loves writing and wants to share my knowledge and understanding with you.